TWIN-MONOTUBE-PROJEKT-KOMFORT VARIABLE COMFORT LIFT SUSPENSION KIT For VW T5, T6, T6.1

Approx. +30 to +40mm complete suspension lift, but as our springs are produced by the PORSCHE spring original equipment manufacturer, with even more comfort, even better driving dynamics and even greater durability. Including all moulded parts (see scope of delivery) plus variable height adjustment option on the rear axle with supplied moulded part. Ingenious KOMFORT set-up in conjunction with the extended and reinforced Bilstein B6 KOMFORT shock absorbers, which bring the superior Bilstein driving behaviour to the rear axle with monotube technology, even in lift suspensions. And despite the higher centre of gravity, they even help to reduce the lateral inclination compared to the standard suspension. Furthermore, it also offers the best possible damping force off-road. Durability, resistance to settling and optimum driving behaviour for suspension lifts. In contrast to Bilstein yellow with approx. 10-15% more comfortable damping in rebound and compression damping for a pleasant driving behaviour in everyday use.

Suitable for T5, T6 and T6.1 with standard suspension (without DCC) !

TWIN-MONOTUBE-PROJEKT offers a new evolution in terms of „ride comfort“, „driving dynamics“ and „durability“!!!

Developed and produced exclusively for TWIN-MONOTUBE-PROJEKT by a renowned German original equipment supplier. Our new supplier is the world market leader and series producer for numerous renowned car brands such as ‘Porsche’, ‘Mercedes’, etc.

The comfort kits from TWIN-MONOTUBE-PROJEKT offer the following advantages over all other springs known to us::

• Significantly better ride comfort and driving dynamics due to:
  • Spring development adapted to the force distribution - a development at this level is only achieved by the series manufacturer!!!
  • Side-load spring on the front axle also enables optimum force distribution
  • Guaranteed system functionality thanks to specially developed, precisely fitting moulded parts minimises creaking and rattling noises
• Variable height adjustment thanks to optionally combinable, specially developed moulded parts, which are included in the scope of delivery for selection
• Significantly higher breaking strength and durability thanks to state-of-the-art production technologies:
  • High-performance wire produced in-house and particularly gentle storage - ‘Made in Germany’
  • Cold forming enables high-strength steel without post-tempering with maximum design freedom
  • 100% fully integrated and automated production process with particularly gentle material flow
  • 3-fold irradiation without beam shadows
• Maximum corrosion resistance for maximum stress:
  • Epoxy powder coating guarantees improved stone chip protection through the integration of special energy-absorbing structures and increased film thickness
• OEM standards for quality controls and approvals::
  • Continuous vibration tests according to series specifications (i.e. under real conditions) with temperature changes and using spray mist in conjunction with all other spring manufacturers known to us who only carry out dry vibration tests
  • 100% tensile strength tests
  • 100% digital laser inspection of the surface condition of the primary material
  • 100% digital inspection of the spring force
  • Combined with the extended and reinforced Bilstein B6 KOMFORT shock absorbers, which bring the superior Bilstein driving behaviour to the rear axle with monotube technology, even in raised suspensions. Also made in Germany.

1) for VW T5, T6, T6.1 but NOT for : California , camper conversions , permanent heavy load

a) For cars with clamp-mounting at the frontaxle ( T30 ) = part-no.: TMP-H11-B30-T5T6.1
b) For cars with bracket-mounting at the frontaxle ( T32 ) = part-no.: TMP-H11-B32-T5T6.1

Included in delivery:
2 x H-VW-T5T6.1-1VA (front spring)
2 x Bilstein B6 KOMFORT frontaxle Twintube shockabsorbers ( clamp-mounting T30 = part-no.: 22-252463 or bracket-mounting at the frontaxle ( T32 ) = part-no.: 22-295682 )
2 x Bilstein B6 KOMFORT rearaxle Monotube shockabsorbers part-no.: 24-249317
2 x H-VW-T5T6.1-1HA (rear spring normal weight)
2 x H-VW-T5T6.1-Federteller-2HA (upper spring seat)
2 x H-VW-T5T6.1-Federteller-1HA (lower spring seat)
2 x H-VW-T5T6.1-spacer-ring-2HA (10mm) for optional + individual adaption of the height see description of the approval + mounting instruction.

2) ONLY for VW T5, T6, T6.1 California or camper conversions or permanent heavy load

a) For cars with clamp-mounting at the frontaxle ( T30 ) = part-no. TMP-H12-B30-T5T6.1
b) For cars with bracket-mounting at the frontaxle ( T32 ) = part-no.: TMP-H12-B32-T5T6.1

Included in delivery:
2 x H-VW-T5T6.1-1VA (front spring)
2 x Bilstein B6 KOMFORT frontaxle Twintube shockabsorbers ( clamp-mounting T30 = part-no.: 22-252463 or bracket-mounting at the frontaxle ( T32 ) = part-no.: 22-295682 )
2 x Bilstein B6 KOMFORT rearaxle Monotube shockabsorbers part-no.: 24-249317
2 x H-VW-T5T6.1-2HA (rear spring heavy weight)
2 x H-VW-T5T6.1-Federteller-2HA (upper spring seat)
2 x H-VW-T5T6.1-Federteller-1HA (lower spring seat)
2 x H-VW-T5T6.1-spacer-ring-2HA (10mm) for optional + individual adaption of the height see description of the approval + mounting instruction.